We are pleased to announce that RBF Morph is supporting the upcoming Workshop “Flow Induced Vibrations”. The Workshop held by Dr. Fabio Paglia from Avio SpA. will guest from the University of Rome “Tor Vergata” on November 27th. Detailed program: – Introduction to Avio company – Avio new product roadmap – Launch vehicle Buffeting during ascent phase – […]
RBF Morph will join the Digital Innovation Hubs Annual Event 2018 that will be taking place in November on 27th and 28th in Warsaw (PL). The aim of the event co-organised by the European Commission, the Department of Innovation at the Polish Ministry of Entrepreneurship and Technology, and the EU-funded initiative I4MS is to reinforce the capacity of DIHs […]
See the link Published on November 2018 Vol. 12, Issue 4, of the International Journal on Interactive Design and Manufacturing (IJIDeM)
Published on the the EnginSoft Newsletter EnginSoft Year 15 n°4 Winter 2018 Download the PDF
Combining Adjoint Optimization and mesh morphing for CFD applications FSI optimization of industrial airplanes: the P180 Avanti EVO study The medical digital twin assisted by Reduced Order Models and Mesh Morphing Use the links below to download: Paper: “Combining Adjoint Optimization and mesh morphing for CFD applications” Paper: “FSI optimization of industrial airplanes: the P180 […]
The presentation titled How RBF mesh morphing can boost multi-physics simulation of vehicle 4.0 by Prof. M.E Biancolini at the SAE International Workshop that was held in University of Roma 3 on 3 October can be download in the Presentations and Proceedings 2018. The aim of this Workshop is to update the participants on the […]
RBF Morph took part in the 34th International CAE Conference that held in October on 8th and 9th in Vicenza (Italy). Specifically three works was presented. The first work titled “Combining Adjoint Optimization and mesh morphing for CFD applications” investigates the applicability of Adjoint optimization combined with mesh morphing to the industrial practice, by the integration of commonly used […]
Automatic shape optimization of structural components with manufacturing constraints Crack propagation analysis of near‐surface defects with Radial Basis Functions mesh morphing Use the links below to download: Paper: “Automatic shape optimization of structural components with manufacturing constraints” Paper: “Crack propagation analysis of near‐surface defects with Radial Basis Functions mesh morphing” Associazione italiana per l’analisi delle […]
The RBF Morph Team took part in the 47th edition of the Italian Conference AIAS 2018 that held in Villa San Giovanni (Italy) 5-8 September, 2018. Two works about the different applications of RBF Morph technology have been presented: Automatic shape optimization of structural components with manufacturing constraints Among optimization procedures, mesh morphing gained a relevant position: it proved […]
Use the links below to download: Presentation: “How RBF mesh morphing can boost multi-physics simulation of vehicle 4.0” SAE International Workshop October 2018 I Rome, Italy I English
