We are pleased to announce that Marco E. Biancolini, owner of RBF Morph, will be one of the trainers of the three days workshop (19-21 June 2017) at CINECA (Milan site) entitled Workshop HPC Methods for Engineering. The event is intended to collect a set of experiences from nowaday professional figures, coming from industry as […]
RBF Morph, the company providing fast mesh morphing tools, announces that a new version of RBF Morph App for ANSYS Workbench is going to be released. “Performances matter.” says Marco E. Biancolini, owner of RBF Morph, about it “A comparison between the new RBF solver and the past one registered a speed up that is […]
A CAD-mesh mixed approach leveraging modeFRONTIER and RBF Morph to enhance shape optimization capabilities Thursday, April 6th, 2017 4 PM CEST See conversion in your timezone On April 6th, ESTECO and RBF-Morph will host a joint webinar presenting an innovative CAD-Mesh mixed approach to enhance shape optimization capabilities. During the Webinar, Riccardo Cenni, CAE Engineer […]
An RBF application will be presented in the speak “Fare innovazione con l’additive manufacturing: risvolti pratici e per il business” that will be given by HSL at the event Simulazione e prototipazione… due preziosi alleati per innovare! organised by Trentino Sviluppo in the framework Innovation Academy 2017 on 15th February, in Rovereto. HSL Italia, partner in EU […]
A study about the application of RBF Morph for the shape optimization of the inlet diffusor having title “Optimizing the EGR for Even Cooling and Structural Stability” has been published on the Engineering.com. The optimizations were made possible by the engineers‘ ability to link the simulations to the CAD models and the design of experiments (DOE) through ANSYS […]
We are pleased to inform you about the paper “Fortissimo launches service to broker HPC resources” published in the December 2016 Issue of Scientific Computing World. RBF Morph powered experiment “Cloud-based Additive Manufacturing” is presented as has been presented as a reference case study. Click here to read the full article!
In the PLENARY Session of CAE Conference 2016 the coordinator of the RBF4AERO project, Dr. Emiliano Costa (D’Appollonia), gave his keynote speech “Reshaping the future of aircraft design”. The final goal of the Project is the development of the RBF4AERO Benchmark Technology, namely a dedicated numerical platform and strategy capable to allow aeronautical design engineers […]
The presentations presented by SACMI Imola at 32st International CAE Conference that was held at Parma in October on 17th and 18th can be download in the Presentations and Proceedings 2016. A CAD-MESH mixed approach to enhance shape optimization capabilities In this presentation a different approach to mix the goods of both the techniques and overtake their limitations […]
An article about the application of RBF Morph for the improvement of the aerodynamic performance of an industrial glider having title “Glider fuselage-wing junction optimization using CFD and RBF mesh morphing” has been published on the journal “Aircraft Engineering and Aerospace Technology” Volume 88 Issue 6. Available online at http://www.emeraldinsight.com/doi/abs/10.1108/AEAT-12-2014-0211 Authors: M. E. Biancolini, E. Costa, U. Cella, C. Groth, G. Veble, M. Andrejašič Abstract: […]
An article involving the use of RBF Morph having title “Static Aeroelastic Analysis of an Aircraft Wind-Tunnel Model by Means of Modal RBF Mesh Updating ” has been published on the journal “Journal of Aerospace Engineering” November 2016, Vol. 29, No. 6. Available online at http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29AS.1943-5525.0000627 (doi: 10.1061/(ASCE)AS.1943-5525.0000627) Authors: Biancolini, M., Cella, U., Groth, C., Genta, M. Abstract: A […]