Category: News

An article about the application of RBF Morph for the improvement of the aerodynamic performance of an industrial glider having title “Glider fuselage-wing junction optimization using CFD and RBF mesh morphing” has been published on the journal “Aircraft Engineering and Aerospace Technology” Volume 88 Issue 6. Available online at http://www.emeraldinsight.com/doi/abs/10.1108/AEAT-12-2014-0211 Authors: M. E. Biancolini, E. Costa, U. Cella, C. Groth, G. Veble, M. Andrejašič    Abstract: […]

An article involving the use of RBF Morph having title “Static Aeroelastic Analysis of an Aircraft Wind-Tunnel Model by Means of Modal RBF Mesh Updating ” has been published on the journal “Journal of Aerospace Engineering” November 2016, Vol. 29, No. 6. Available online at http://ascelibrary.org/doi/abs/10.1061/%28ASCE%29AS.1943-5525.0000627 (doi: 10.1061/(ASCE)AS.1943-5525.0000627) Authors: Biancolini, M., Cella, U., Groth, C., Genta, M. Abstract: A […]

The application of mechanical principles for solving biological problems has been dynamically expanding and CAE simulations have found effective application for biomechanics studies. In the new article published in the Italian journal “Analisi e Calcolo” n° 76 Sep. 2016 two important applications of the mesh morphing in biomechanics simulation, both in cases of hemodynamic are […]

If you want to learn more about the RBF Morph FSI capabilities and you take a closer look at what it covers read a short introduction that shows how to perform steady and transient fluid structures simulation by embedding structural modes in the Fluent CFD solvers. In tihis presentation besides an FSI capabilities overview RBF Morph, […]

As partner of the RBF4AERO Consortium, the RBF Morph team participated in 2016 ECCOMAS (European Congress on Computational Methods in Applied Science and Engineering) Congress in Crete 5 to 10 June 2016. Three works presented on optimization strategies and procedures of RBF4AERO technology benchmark: adjoint-morphing coupling, fluid structure interaction, based optimization evolutionary algorithm and the strategies adopted […]

RBF Morph is very excited to announce the launch of our newly designed website, appealing, responsive, rich content, with a fresh new look. We wanted to make the new website faster, easier to navigate, and more user-friendly. The site’s homepage features bright colors and an uncluttered design and quick and easy access to essential information […]

The article Geometric Parameterization Strategies for shape Optimization Using RBF Mesh Morphing presented at 7th Joint Conference of ADM –INGEGRAF – AIP PRIMECA – JCM 2016 that was held  at Catania in Italy between 14th and 16th September 2016 can be download in the Presentations and Proceedings. Abstract Mesh morphing is one of the most promising approach for problems in which […]

RBF Morph will be at the TechNet Alliance Fall Meeting 2016 to be held on 14 and 15 October in Salsomaggiore Terme – Parma (Italy). During the meeting a study entitled “Shape optimisation of 3d printed high performances automotive parts” will be presented by Prof. Marco Evangelos Biancolini. This work was carried out in cooperation with […]

RBF Morph will join the 32st International CAE Conference that will be taking place in October on 17th and 18th in Parma, Pagani Congressi (Italy). Three applications of RBF Morph technology will be presented. Two studies will be presented by Sacmi Imola while the third was carried out in collaboration with D’Appolonia SpA. The first […]

RBF Morph will join the 7th edition of the modeFRONTIER International Users’ Meeting which will be held on 17th-18th May 2016 in Trieste. Riccado Cenni CAE Engineer of Sacmi Imola, will present in the INDUSTRY session a work titled “A CAD-mesh mixed approach to enhance shape optimization capabilities”. In this paper a methodology based on […]